Ryobi BD4600 English Manual - Page 11
Assembly, Loose Parts - parts list
View all Ryobi BD4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
loose parts The following items are included with the tool: n Sanding Disc n Disc Guard n Phillips Screws (2) n Socket Head Screws, M8 x 12 (2) n Washers (2) n Miter Gauge n Hex Key n Worktable n Work Support n Operator's Manual (not shown) DISC GUARD MITER GAUGE WORK SUPPORT SANDING DISC socket head screws PHILLIPS SCREWS WORKTABLE HEX KEY WASHERS Fig. 5 ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. 11