Ryobi BD4600 English Manual - Page 9

FEATURES PRODUCT SPECIFICATIONS Belt Size 4 in. x 36 in. Belt Speed 1,900 SFM Belt Tilt 0°- 90° Disc Size 6 in. Disc Speed 3,600 r/min. (RPM) Table Size 8-1/2 in. x 5-3/4 in. Table Tilt 0°- 45° Input 120 V, AC only, 60 Hz, 4.3 Amps Motor 1/2 HP Induction Net Weight 53 lbs. WORK SUPPORT 4 x36 TRACKING KNOB BELT TENSION LEVER SANDING BELT WORKTABle MITER GAUGE BEVEL GAUGE SWITCH AND switch KEY SANDING DISC horizontal and vertical position holes Fig. 2 Know Your BELT/DISC SANDER See Figure 2. The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. BELT tension leveR The belt tension lever releases the belt tension for easy belt replacement. SANDING BELT The sanding belt can be adjusted from horizontal to vertical providing different positions for sanding workpieces of different shapes and sizes. SANDING DISC A round sanding disc is located on the side of the belt/disc sander. switch and switch key Your belt/disc sander has an easy access power switch. Bevel gauge The worktable comes equipped with a bevel gauge that indicates the degrees the worktable can be tilted up to 45°. Horizontal and vertical position HOLES The horizontal and vertical position holes are used for changing the position of the belt from horizontal to vertical. MITER GAUGE The miter gauge aligns the wood for positive stops at 90° and 45°. TRACKING KNOB A tracking knob aids in centering the sanding belt. WORK SUPPORT Supports the workpiece on the sanding belt. WORKTABLE Equipped with a sturdy worktable that provides a stable surface when using either the disc sanding or the belt sanding feature.