Ryobi JM82K English Manual - Page 10

ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST Biscuit Joiner #10 Biscuits (20) Carrying Case Operator's Manual INSTALLING/REMOVING THE DUST BAG See Figure 2. The dust bag located on the rear of the biscuit joiner provides a dust collection system. Wood particles are drawn up through the base and collect in the dust bag during cutting operations. For more efficient operation, empty the dust bag when half full. To install, slide the dust bag adaptor onto the dust port on the biscuit joiner. To remove the dust bag, grasp the adaptor and pull the dust bag away from the biscuit joiner. DUST BAG ADAPTOR DUST BAG WARNING: If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. TO INSERT TO REMOVE Fig. 2 WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. ATTACHING THE BISCUIT JOINER TO A VACUUM See Figure 3. The dust bag can be removed and a 1-1/4 in. vacuum can be attached to the dust port. n Unplug the biscuit joiner. n Remove the dust bag. n Attach a vacuum hose to the dust port. n Connect the biscuit joiner and the vacuum to a power supply. WARNING: When the tool is not connected to vacuum, always reinstall the dust bag back onto the tool. Failure to do so could cause dust or foreign objects to be thrown into your face or eyes which could result in possible serious injury. Fig. 3 10