Ryobi JS550LK English Manual - Page 18

Laser Guide Adjustment, Warning

Get Ryobi JS550LK PDF manuals and user guides View all Ryobi JS550LK manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

ADJUSTMENTS LASER GUIDE ADJUSTMENT See Figure 20. NOTE: Draw a pencil line on a scrap workpiece parallel to the long edge of the base as a straight line guide to aid in the adjusting process.  Unplug the jig saw. WARNING: Failure to unplug your saw could result in accidental starting causing possible serious personal injury.  If the laser guide is on the right side of the line, turn the laser adjustment screw counter clockwise one half of a turn.  If the laser guide is on the left side of the line, turn the laser adjustment screw clockwise one half of a turn.  Plug saw into power supply.  Pull the switch trigger just enough to light the laser guide to check for position.  Repeat above steps if necessary. LASER ADJUSTMENT SCREW LASER LINE AT LEFT SIDE CUT LINE LASER LINE AT RIGHT SIDE Fig. 20 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
18
ADJUSTMENTS
LASER GUIDE ADJUSTMENT
See Figure 20.
NOTE:
Draw a pencil line on a scrap workpiece parallel to
the long edge of the base as a straight line guide to aid in
the adjusting process.
Unplug the jig saw.
WARNING:
Failure to unplug your saw could result in accidental start-
ing causing possible serious personal injury.
If the laser guide is on the right side of the line, turn the
laser adjustment screw counter clockwise one half of a
turn.
If the laser guide is on the left side of the line, turn the
laser adjustment screw clockwise one half of a turn.
Plug saw into power supply.
Pull the switch trigger just enough to light the laser guide
to check for position.
Repeat above steps if necessary.
Fig. 20
LASER LINE AT
RIGHT SIDE
CUT LINE
LASER LINE AT
LEFT SIDE
LASER
ADJUSTMENT
SCREW