Ryobi P524 Operation Manual - Page 6

FEATURES PRODUCT SPECIFICATIONS Length of Stroke 1 in. Strokes Per Minute 800-3,350 /min. (SPM) Cutting Angle 0° to 45° (Left and Right) Orbital Motion 4 Settings ASSEMBLY WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. OPERATION WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always remove battery pack from the tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1.Failure to do so could result in objects being thrown into your eyes and other possible serious injuries. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. WARNING: To avoid possible serious injury, keep hands and fingers away from the area between the gear housing and saw blade clamp. APPLICATIONS You may use this product for the purposes listed below:  Cutting all types of wood products (lumber, plywood, paneling, composition board and hard board)  Cutting thin sheet metal  Cutting plastics and laminates. OVERLOAD PROTECTION When the tool is forced or overloaded, the Li-ion battery pack will automatically shut off the tool. To reset the tool, release the trigger and resume operation. If the tool still does not resume operation, remove and reinsert the battery. Do not force the tool. HIGH TEMPERATURE PROTECTION Li-ion battery packs are equipped with a high temperature protection feature that automatically deactivates the tool when it is overheated. To resume operation, allow the battery to cool and then squeeze the trigger. 6 - English