Ryobi RY40860 Operation Manual - Page 16

TROUBLESHOOTING IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER. PROBLEM Handle not in position. POSSIBLE CAUSE SOLUTION Handle adjustment knobs and/or handle Make sure handle adjust knobs are fully lock levers are not secured. seated and handle lock levers are fully closed. Snow blower not starting. Battery is low in charge. Start button is not depressed. Charge the battery. Press start button. The motor is on but the impeller does The drive belt is worn or broken. not turn. Have the drive belt replaced by an authorized service center. After passing, the snow blower leaves The scraper is worn. a layer of snow on the ground. The impeller mechanism is worn. Replace the scraper. See Replacing the Scraper in the Maintenance section. Have the impeller mechanism replaced by an authorized service center. MAKE THE MOST OF YOUR PURCHASE! Go to http://register.ryobitools.com and register your new tool on-line. Your product has been fully tested prior to shipment to ensure your complete satisfaction. For any questions about operating or maintaining your product, call the RYOBI Help Line! This product has a Five-year Limited Warranty for personal, family, or household use (90 days for business or commercial use). For warranty details, visit www.ryobitools.com or call (toll free) 1-800-860-4050. 12 - English