Ryobi RYi2200A User Manual - Page 15
Assembly
View all Ryobi RYi2200A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ASSEMBLY UNPACKING This product requires assembly. Carefully cut the box down the sides then remove the machine and any accessories from the box. Make sure that all items listed in the loose parts list are included. NOTE: This machine is heavy and requires a minimum of two people to lift. To avoid back injury, lift with your legs and not your back. WARNING: Do not use this product if any parts on the Loose Parts List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. Inspect the unit carefully to make sure no damage occurred during shipping. Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. If any parts are damaged or missing, please call 1-800-860-4050 for assistance. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not attempt to operate the generator until assembly is complete. Failure to comply could result in possible serious personal injury. LOOSE PARTS LIST See Figure 3. The following items are included with the generator: Key No. Description Qty. 1 Axle 2 2 Wheel 2 3 Washer 2 4 Hitch Pin 2 5 Bolt 2 6 Rubber Foot 2 7 Lock Nut 2 8 Bottle of Engine Lubricant 1 Operator's Manual (not shown 1 TOOLS NEEDED See Figure 4. The following tools (not included or drawn to scale) are needed for assembly: Socket Wrenches Adjustable Wrench Phillips Screwdriver NOTE: Do not put fuel or lubricant in the generator before installing the feet and wheels. INSTALLING FEET See Figure 5. Locate the following items: 2 rubber feet 2 lock nuts 2 bolts Insert bolt through rubber foot, then through the cross brace as shown. Thread lock nut onto bolt and tighten one full turn past snug. NOTE: Be careful not to overtighten so that foot material collapses. Repeat with remaining foot. Page 11 - English