Ryobi TC401 Operation Manual - Page 6

SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates a hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a hazardous situation, that, if not avoided, may result in minor or moderate injury. NOTICE: (Without Safety Alert Symbol) Indicates information considered important, but not related to a potential injury (e.g. messages relating to property damage). Some of the following symbols may be used on this product . Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard. Read Operator's Manual To reduce the risk of injury, user must read and understand operator's manual before using this product. Eye Protection Always wear eye protection with side shields marked to comply with ANSI Z87.1. Wet Conditions Alert Do not expose to rain or use in damp locations. No Hands Symbol Failure to keep your hands away from the cutting wheel will result in serious personal injury. V A Hz W min no .../min Electrocution Volts Amperes Hertz Watt Minutes Alternating Current No Load Speed Class II Construction Per Minute Failure to properly ground can result in electrocution. Voltage Current Frequency (cycles per second) Power Time Type of current Rotational speed, at no load Double-insulated construction Revolutions, strokes, surface speed, orbits etc., per minute 6 - English