Samsung 2220WM Service Manual - Page 6

Installation Precautions

Page 6 highlights

1-4 Installation Precautions 1. For safety reasons, more than two people are required for carrying the product. 2. Keep the power cord away from any heat emitting devices, as a melted covering may cause fire or electric shock. 3. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature may cause fire. 4. Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed to moisture. Otherwise, it may cause a fire or electric shock. 5. Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause fire or electric shock. 6. Keep the antenna far away from any highvoltage cables and install it firmly. Contact with the high- voltage cable or the antenna over may cause fire or electric shock. 7. When installing the product, leave enough space (10cm) between the product and the wall for ventilation purposes. A rise in temperature within the product may cause fire. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49

6
1-4 Installation Precautions
1
. For safety reasons, more than two people
are required for carrying the product.
2. Keep the power cord away from any heat
emitting devices, as a melted covering may
cause fire or electric shock.
3. Do not place the product in areas with poor
ventilation such as a bookshelf or closet. The
increased internal temperature may cause
fire.
4.
Bend the external antenna cable when
connecting it to the product. This is a measure
to protect it from being exposed to moisture.
Otherwise, it may cause a fire or electric shock.
5.
Make sure to turn the power off and unplug the
power cord from the outlet before repositioning
the product. Also check the antenna cable or
the external connectors if they are fully
unplugged. Damage to the cord may cause fire
or electric shock.
6. Keep the antenna far away from any high-
voltage cables and install it firmly. Contact
with the high- voltage cable or the antenna
over may cause fire or electric shock.
7.
When installing the product, leave enough
space (10cm) between the product and the wall
for ventilation purposes. A rise in temperature
within the product may cause fire.