Samsung 550N User Manual (ENGLISH) - Page 194
Understanding Display Messages, Message, Status
UPC - 635753700305
View all Samsung 550N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Understanding Display Messages Messages appear on the display on the control panel to indicate the printer's status or errors. Refer to the tables below to understand the message's meaning and correct the problem if necessary. Messages and their meanings are listed in alphabetical order. NOTE: When you call for service, it is very helpful to tell the service representative the display message. Message ADC Not Confirm Error Cover Open CTD Calibration Error Dev. Motor Error Engine Fuser Low Heat Error Engine Fuser Over Heat Error Engine LSU Error Install [Color] Toner Install Imaging Unit Install Transfer Belt Status Do this... A problem has occurred Contact a service representative. in the ADC in the printer. The top cover is open. Close the top cover firmly. The CTD sensor is polluted by dust or toner. Contact a service representative. A problem has occurred in the development motor of the printer. Unplug the power cord and plug it in again. If the problem persists, please call for service. The fuser temperature is abnormally low. Unplug the power cord and plug it in again. If the problem persists, please call for service. The fuser temperature is abnormally high. Unplug the power cord and plug it in again. If the problem persists, please call for service. A problem has occurred in the LSU (Laser Scanning Unit) in the printer. Unplug the power cord and plug it in again. If the problem persists, please call for service. The indicated color toner cartridge is not installed in the printer. Install the corresponding color toner cartridge. The imaging unit is not installed in the printer. Install the imaging unit. The transfer belt is not installed in the printer. Install the transfer belt. 7.26 SOLVING PROBLEMS