Samsung 550N User Manual (ENGLISH) - Page 253

Upper Level, Enter, On Line/Continue, Dynamic Addressing BOOTP/DHCP, Enter a number between 0

Page 253 highlights

10 Press the Upper Level button ( ), then use the scroll button ( ). 11 Press the Enter button ( ) to access the IP Address menu. An IP address consists of 4 bytes. Enter a number between 0 and 255 for each byte. 12 Press the scroll button ( or ) to enter a number between 0 and 255 and press the Enter button ( ). 13 Repeat Step 12 to complete the address. You must enter number for each of the 4th bytes. 14 To select other parameters, such as the Subnet Mask or Gateway, press the scroll button ( or ). Press the Enter button ( ). 15 Repeat steps 12 through 13 to configure the other TCP/IP parameters. 16 Press the On Line/Continue button ( ) to return to ready mode. Dynamic Addressing (BOOTP/DHCP) To assign the TCP/IP address automatically by the server, take the following steps: 1 In ready mode press the Menu button ( ) until you see 'Network' on the bottom line of the display. Press the Enter button ( ) to access the menu. 2 Press the Enter button ( ) when 'Config Network' displays on the bottom line. E 3 Press the scroll button ( or ) to display 'Yes' and press the Enter button ( ). USING YOUR PRINTER ON A NETWORK E.9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289

U
SING
Y
OUR
P
RINTER
ON
A
N
ETWORK
E.
9
E
10
Press the
Upper Level
button (
), then use the scroll
button (
).
11
Press the
Enter
button (
) to access the IP Address
menu.
An IP address consists of 4 bytes.
12
Press the scroll button (
or
) to enter a number
between 0 and 255 and press the
Enter
button (
).
13
Repeat Step 12 to complete the address. You must enter
number for each of the 4th bytes.
14
To select other parameters, such as the Subnet Mask or
Gateway, press the scroll button (
or
). Press the
Enter
button (
).
15
Repeat steps 12 through 13 to configure the other TCP/IP
parameters.
16
Press the
On Line/Continue
button (
) to return to
ready mode.
Dynamic Addressing (BOOTP/DHCP)
To assign the TCP/IP address automatically by the server, take
the following steps:
1
In ready mode press the
Menu
button (
) until you see
‘Network’ on the bottom line of the display. Press the
Enter
button (
) to access the menu.
2
Press the
Enter
button (
) when ‘Config Network’ displays
on the bottom line.
3
Press the scroll button (
or
) to display ‘Yes’ and press
the
Enter
button (
).
Enter a number between 0
and 255 for each byte.