Samsung 580STFT User Manual (user Manual) (ver.1.0) (English) - Page 7

English 4_E570S580Sbody.fm Page 5 Monday, July 16, 2001 2:53 PM Setting up Your Monitor Connecting Your FPD Monitor ➂ ➄ y ➃ ➃ Figure 3. Cable connections 1 Turn off your computer and unplug its power cord. 2 Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3 Connect the signal cable to the video port on your computer, video board, video card, or graphics card. 4 Connect the power cord for your monitor to the DC adapter and connect the adapter jack to the DC power port on the back of your monitor. 5 Plug the computer and monitor power cords into a nearby power mains outlet. 6 Turn your computer and monitor on. If your monitor displays an image, it has been successfully installed. 7 If necessary, install the video driver for this monitor (see "Installing the Video Driver" on page 7). 8 After your monitor has been fully installed, run Auto Adjustment (see page 11). 5