Samsung 9.1.2ch Soundbar w/ Wireless Dolby Atmos / DTS:X and Rear Speakers 2022 - Page 15
Manually connecting the Subwoofer
View all Samsung 9.1.2ch Soundbar w/ Wireless Dolby Atmos / DTS:X and Rear Speakers 2022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Manually connecting the Subwoofer Before performing the manual connection procedure below: • Check whether the power cables for the Soundbar and subwoofer is connected properly. • Make sure that the Soundbar is turned off. 1. Turn off the Soundbar main. 2. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. • The red indicator on the rear of the subwoofer turns off and the blue indicator blinks. 5 Sec Blinking blue fast Rear of Subwoofer Rear of Subwoofer 3. Press the Up button on the remote control for 5 seconds. • The ID SET message appears on the display of the Soundbar for a moment, and then it disappears. • The Soundbar will automatically power on when ID SET is complete. PAIR 5 Sec SOMUONDDE 4. Check if the LINK LED is solid blue (connection complete). ID SET LINK LED - Blue is On The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Subwoofer. ENG - 15