Samsung 9.1.2ch Soundbar w/ Wireless Dolby Atmos / DTS:X and Rear Speakers 2022 - Page 9

03 USING THE SOUNDBAR REMOTE CONTROL Inserting Batteries before using the Remote Control (AAA batteries X 2) Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover back into position. How to Use the Remote Control 1 Turns the Soundbar on and off. 1 • Auto Power Down Function Power The unit turns off automatically in the following situations: • In D.IN / HDMI / Wi-Fi / BT mode if there is no audio signal for 2 3 18 minutes. 2 Press to select a source connected to the Soundbar. Source 8 9 3 Switch the Soundbar to Bluetooth pairing mode. Press the button and wait for the "BT PAIRING" screen to connect to a new Bluetooth device. Bluetooth PAIR 4 10 4 Press the (Mute) button to mute the sound. 5 Press it again to unmute the sound. 11 Mute 12 5 By pressing the button, you can select the desired audio mode such as 6 13 Surround, Game, Standard, Adaptive sound. 7 SOUND MODE • Standard SOUNDBAR Outputs the original sound. • Surround Provides a wider sound field than standard. • Game Provides stereoscopic sound to immerse you in the action while gaming. • Adaptive sound Analyzes the content in real time and automatically provides the optimal sound field based on the characteristics of the content. 6 By pressing the button, you can adjust the volume of the each speaker such as Center level, Side level, Wide level, Front Top level, and Rear CH LEVEL level. • To control the volume of the each speaker select Center level, Side level, Wide level, or Front Top level in Sound Settings, and then adjust the volume between -6~+6 by using the Up/Down buttons. • If Surround Speakers are connected, select Rear level and then use the Up/Down buttons to adjust the volume within a -6 to +6 range. • CH LEVEL specifications may differ with the respective model. ENG - 9