Samsung CLP 300 User Manual (ENGLISH) - Page 14

2 Setting Up Your Printer This chapter gives you step-by-step instructions for setting up your printer. This chapter includes: • Unpacking • Installing the Toner Cartridges • Loading Paper • Connecting a Printer Cable • Turning the Printer On • Printing a Demo Page • Altitude adjustment • Installing the Printer Software Unpacking 1 Remove the printer and all of the accessories from the packing carton. Make sure that the printer has been packed with the following items: Toner Cartridges Power Cord CAUTION: Because your printer weighs 13.6 kg including the toner cartridges and the tray, it may move when you use it; for example, when opening/closing the tray or installing/removing the toner cartridge. Be careful not to move the printer. 2 Remove the packing tape in front of the tray and pull the tray out. Remove the packing tape and paper cushion from the tray. 3 Select a location for the printer: • Leave enough room to open the tray and covers, and to allow for proper ventilation. • Provide the proper environment: - A firm, level surface - Away from the direct airflow of air conditioners, heaters, or ventilators - Free of temperature, sunlight, and humidity extremes or fluctuations - Clean, dry, and free of dust Printer software CD Quick Install Guide NOTES: • If any items are missing or damaged, notify your dealer immediately. • Components may differ from one country to another. • The Printer Driver CD contains the printer driver, the User's Guide, and the Adobe Acrobat Reader program. • The appearance of the power cord may differ depending on your country's specifications. The power cord must be plugged into a grounded power socket. CAUTION: • You must place your printer on a level surface. If you do not, print quality problems can occur. • When you move the printer, do not tilt or turn it upside down, or the inside of the printer may be contaminated by toner, which can cause damage to the printer or bad printing quality. 2.1 Setting Up Your Printer