Samsung CLP-680ND User Manual Ver.1.0 (English) - Page 98
Output bin Full, Install TR. - transfer belt replacement
View all Samsung CLP-680ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Understanding display messages Message Calibrating image density... Door Open Close it Error [error number] Install [color] toner Error [error number] Turn off then on Error [error number] Call for service Install TR. belt unit. Not compatible transfer belt Meaning Suggested solutions The machine is calibrating Wait a few minutes. the image density. The cover is not securely latched. Close the cover until it locks into place. The indicated toner cartridge is installed improperly, or the connector is polluted. The machine unit cannot be controlled. Reinstall the Samsunggenuine toner cartridge two or three times to confirm it is seated properly. If the problem persists, please call for service. Reboot the power and try the printing job again. If the problem persists, please call for service. The transfer belt is not installed. The transfer belt of the machine is not for your machine. Install a Samsung-genuine transfer belt. Install the a Samsunggenuine part designed for your machine. Message Meaning Suggested solutions Not installed Waste tank The is waste toner container not installed. Install a Samsung-genuine waste toner container. Not proper room temp. Move set The machine is in a room with improper room temperature. Move the machine to a room with proper room temperature. Output bin Full Remove paper The output tray is full. Remove papers from the output tray, the machine resumes printing. If the problem persists, call for service. Prepare new Transfer belt Replace new Transfer belt The life of the transfer belt will expired soon. The life of the transfer belt has expired. Replace the transfer belt with a new one. If the problem persists, please call for service. Replace Fuser Soon Replace new Fuser unit The life of the fuser unit will be expired soon. The life of the fuser unit will be expired. Replace the fuser unit with a new one. If the problem persists, please call for service. • Replace new Tray1 roller • Replace new Tray2 roller The life of the tray pick-up roller will expired soon. The life of the tray pick-up roller will expired. Replace the tray pick-up roller with a new one. If the problem persists, please call for service. 4. Troubleshooting 99