Samsung CW-29M064N User Manual (user Manual) (ver.1.0) (English) - Page 12
Plug & Play Feature
View all Samsung CW-29M064N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Plug & Play Feature (depending on the model) ENG When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock. Plug & Play Language English Deusch Français Nederland Espanõl Português Italiano Sverige Türkçe E Ant. Input Check P1C -- --471 MHz 48 % Time Clock 11 : 35 ENJOY YOUR WATCHING Function Language : English Time √ Plug & Play √ Blue Screen : Off Child Lock √ Demonstration √ 12 1 If the television is in Standby mode, press the POWER ( ) button on the remote control. Result: The message Plug & Play is displayed. It flickers for a little while and then the "Language" menu is automatically displayed. 2 Press the ▲ or ▼ button to select required language. Press the MENU button to enter the language, and then the message Ant. Input : Check is displayed. ➣ If any language is not selected on the Language menu, the "Language" menu will be displayed about 30 seconds later. 3 Make sure that the antenna is connected to the TV. And then press the œ or √ button to store the channels (refer to "Storing the Channels Automatically" on page 14). Result: The horizontal bar is displayed, and then channels are stored in an order which reflects their positions in the frequency range. 4 When searching and storing is complete, the Time menu is displayed. 5 Press the œ or √ button to move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button (refer to "Setting and Displaying the Current Time" on page 30). 6 When you have finished, press the MENU ( ) button. Result: The message ENJOY YOUR WATCHING is displayed, and then the channel which has been stored will be activated. 7 If you want to reset this feature... 1 Press the MENU button. 2 Press the ▲ or ▼ button to select the Function, and then press the œ or √ button. 3 Select the Plug & Play by pressing the ▲ or ▼ button, and then press the œ or √ button. Result: The message Plug & Play is displayed.