Samsung CW-29M066V User Manual (user Manual) (ver.1.0) (English) - Page 35

Viewing an External Signal Source/Edit Name (depending on the model) Use the remote control to switch between viewing signal from connected equipment, such as VCR, DVD, Set-Top-boxes and the TV source (broadcast or cable). 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ENTER ( ) button to select Input. Result: The options available in the Input group are displayed. 3 Press the ENTER ( ) button again to select Source List. Result: The options available in the Source List group are displayed. 4 Press the ▲ or ▼ button to select signal source, then press the ENTER ( ) button. ➢ When you connect equipment to the TV, you can choose between the following sets of jacks : EXT1 or EXT2 on the TV's rear panel, and AV/S-Video on the TV's side panel. ➢ You can also set these options simply by pressing the SOURCE ( ) button. If you change the external source while viewing, pictures might take a short period of time to be switched. Edit Name 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ENTER ( ) button to select Input. Result: The options available in the Input group are displayed. 3 Press the ▲ or ▼ button to select Edit Name. Press the ENTER ( ) button. Result: The options available in the Edit Name group are displayed. 4 Press the ▲ or ▼ button to select external device : EXT1 - EXT2 - AV - S-Video. 5 Press the œ or √ button. 6 Select the name by pressing the œ or √ button. 7 Set other signal sources (EXT1, EXT2, AV, S-Video) using the same method as listed above. TV Source List Edit Name Input : TV √ √ Move Enter Return TV Source List TV EXT1 EXT2 AV/S-Video Move Enter Return TV Source List Edit Name Input : TV √ √ Move Enter Return TV EXT1 EXT2 AV S-Video Edit Name œ ------ √ : ------ : ------ : ------ Move œ √ Adjust Return TV EXT1 EXT2 AV S-Video Edit Name œ DVD √ : ------ : ------ : ------ Move œ √ Adjust Return English - 35