Samsung CW-29Z308T User Manual (user Manual) (ver.1.0) (English) - Page 23

Selecting the Sound Mode(depending on the model)

Get Samsung CW-29Z308T PDF manuals and user guides View all Samsung CW-29Z308T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Selecting the Sound Mode (depending on the model) The DUAL I-II button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either "Dual-I " or "Stereo", depending on the current transmission. NICAM Stereo A2 Stereo Type of broadcast Regular broadcast (Standard audio) Regular + NICAM Mono NICAM Stereo NICAM Dual-I/II Regular broadcast (Standard audio) Bilingual or Dual-I/II Stereo On-screen indication Mono (Normal use) Mono NICAM Stereo NICAM Dual-I NICAM → ↔ ↔ Dual-II NICAM Mono (Normal) Mono (Normal) → Mono (Normal) Mono (Normal) Dual-I Stereo ↔ Dual-II ↔ Mono (Forced mono) ➢ ◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the Mono. ◆ If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. ◆ When receiving a mono sound in the AV mode, connect to the "AUDIO-L" input connector on the panel (front or side). If the mono sound comes out only from left speaker, press the DUAL I-II button. English - 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
English - 23
Selecting the Sound Mode
(depending on the model)
The
DUAL I-II
button displays/controls the processing and output of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual-I ” or “Stereo”, depending on the current transmission.
Type of broadcast
On-screen indication
NICAM
Stereo
Regular broadcast
(Standard audio)
Mono
(Normal use)
Regular + NICAM
Mono
Mono
NICAM
↔
Mono
(Normal)
NICAM Stereo
Stereo
NICAM
↔
Mono
(Normal)
NICAM Dual-I/II
Dual-I
NICAM
→
Dual-II
NICAM
→
Mono
(Normal)
A2
Stereo
Regular broadcast
(Standard audio)
Mono
(Normal)
Bilingual or Dual-I/II
Dual-I
↔
Dual-II
Stereo
Stereo
↔
Mono
(Forced mono)
➢
◆
If the receiving conditions deteriorate, listening will be easier if the mode is set to the
Mono
.
◆
If the stereo signal is weak and an automatic switching occurs, then switch to the
Mono
.
◆
When receiving a mono sound in the AV mode, connect to the “AUDIO-L” input connector on the panel (front or side).
If the mono sound comes out only from left speaker, press the
DUAL I-II
button.