Samsung DMT400RHS Installation Guide Ver.1.0 (English, French, Spanish) - Page 10

Check The Electrical Requirements And Cautions - ratings

Get Samsung DMT400RHS PDF manuals and user guides
UPC - 036725593985
View all Samsung DMT400RHS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

installing the dishwasher STEP 4 CHECK THE ELECTRICAL REQUIREMENTS AND CAUTIONS The electrical requirements for the dishwasher are as follows: • In the United States, install in accordance with the National Electric Code/State and Municipal codes and/or local codes. • In Canada, install in accordance with the Canadian Electric Code C22.1-latest edition/Provincial and Municipal codes and/or local codes. • For cable direct connections. - Use flexible, armored or non-metallic sheathed, copper wire with a grounding wire that meets the wiring requirements for your local codes and ordinances. - Use the strain relief method provided with the wiring junction box or install a U.L.-listed/CSA-certified clamp connector to the wiring junction box. If using conduit, use a U.L.-listed/CSA-certified conduit connector. • For power cord connections - The power supply cord must plug into a mating three prong, grounded outlet, located in the cabinet next to the dishwasher opening. The outlet must meet your local codes and ordinances. Use a U.L.listed/CSA-certified power cord kit. - The dishwasher must be connected to an electrical supply that provides the voltage and amperage marked on the rating plate of the unit: 15 amps, 120 volts, 60Hz AC. - Ensure that the circuit breaker connected to the dishwasher is off. - The power cable must not extend more than 4 ft (1.2 m) from the side of the dishwasher. - Check with a qualified electrician or serviceman if you are unsure whether the dishwasher is properly connected. - Do not connect another appliance to the same power outlet as the dishwasher. - Before connecting the power cable to the dishwasher, ensure that there are no electrical hazards (which may result in fire, explosion, electric shock, or personal injury). - The power cable must pass through the channel on the bottom of the dishwasher as shown in Figure 3. Power cable Hot Water Supply Line 5¹⁄3~7¹⁄3 in. (135 ~ 185mm) 10_ installing the dishwasher installation_DD68-00046A-06_EN_130401.indd Sec3:10 Dishwasher bottom 2013-04-01 5:05:22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
10_
installing the dishwasher
STEP 4
CHECK THE ELECTRICAL REQUIREMENTS AND CAUTIONS
The electrical requirements for the dishwasher are as follows:
•
In the United States, install in accordance with the National Electric Code/State and Municipal codes
and/or local codes.
•
In Canada, install in accordance with the Canadian Electric Code C22.1-latest edition/Provincial and
Municipal codes and/or local codes.
•
For cable direct connections.
-
Use flexible, armored or non-metallic sheathed, copper wire with a grounding wire that meets the
wiring requirements for your local codes and ordinances.
-
Use the strain relief method provided with the wiring junction box or install a U.L.-listed/CSA-certified
clamp connector to the wiring junction box. If using conduit, use a U.L.-listed/CSA-certified conduit
connector.
•
For power cord connections
-
The power supply cord must plug into a mating three prong, grounded outlet, located in the cabinet
next to the dishwasher opening. The outlet must meet your local codes and ordinances. Use a U.L.-
listed/CSA-certified power cord kit.
-
The dishwasher must be connected to an electrical supply that provides the voltage and
amperage marked on the rating plate of the unit: 15 amps, 120 volts, 60Hz AC.
-
Ensure that the circuit breaker connected to the dishwasher is off.
-
The power cable must not extend more than 4 ft (1.2 m) from the side of the dishwasher.
-
Check with a qualified electrician or serviceman if you are unsure whether the dishwasher is
properly connected.
-
Do not connect another appliance to the same power outlet as the dishwasher.
-
Before connecting the power cable to the dishwasher, ensure that there are no electrical
hazards (which may result in fire, explosion, electric shock, or personal injury).
-
The power cable must pass through the channel on the bottom of the dishwasher as shown
in Figure 3.
<Figure 3>
installing the dishwasher
Hot Water
Supply Line
Dishwasher bottom
Power cable
5¹⁄
3
~7¹⁄
3
in.
(135 ~ 185mm)
installation_DD68-00046A-06_EN_130401.indd Sec3:10
installation_DD68-00046A-06_EN_130401.indd
Sec3:10
2013-04-01
5:05:22
2013-04-01
5:05:22