Samsung DV363EWBEUF/A1 Trouble Shooting Guide User Manual Ver.1.0 (English, Fr - Page 2

ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power. ERROR ITEMS AND DIAGNOSTIC CODES An occurrence of an Error will make a sound of error melody for 5sec and con tinuously show one of the Error Displays from the following errors. Error Display LED LCD Trigger Action Taken tS to tE The Termistor resistance is very low or high. Check for: - Clogged lint screen. - Restricted vent system. - Check Thermistor resistance. hE HE Invalid heating Temp in running the dryer Check for: - Restricted vent system. - Check Thermistor resistance. Check for: do Running the dryer with door - Close the door, and run the dryer dE open - Loose or open wire terminals in Door Sense circuit. dF Invalid door state for more than 256 milliseconds Check for: - Loose or open wire terminals in Door Sense circuit. Invalid state of key circuit short bE for 30 secs(all models) Check for: bE2 75 secs(DV339,DV338,DV448,D - Display PCB key circuit short or not V438,DV428) Check for: FE Invalid power source Frequency - Not using regular power source frequency - Invalid power frequency sense circuit Check for: 9E Electronic Control Problem (Communication Error) - Check PCB and Wire harness. - Replace PCB od Invalid Dry time in excess Dry time Check for: - Sensor bar Open - using Adjust time Up excessively Et Invalid state of Eeprom communication Check for : - PCB with Eeprom circuit. 2 Technical_information-02365J_EN.indd 2 2012-06-05 �� 5:08:12