Samsung DV363EWBEUF/A1 Trouble Shooting Guide User Manual Ver.1.0 (English, Fr - Page 4
Temperature Display Modein Celsius, Software Version Mode, System Check Mode, WARNING
View all Samsung DV363EWBEUF/A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power. Temperature Display Mode(in Celsius) Definition of Temperature Display Mode: - With power on, Press Sinal and Wrinkle Prevent keys simultanously for 3 seconds. - This action will put the dryer into Touch Sensor Mode - Under "Touch Sensor Mode", Press Time and Wrinkle Prevent Keys at the same time. - Then the dryer will display the temperature of drum inside in Celsius. How to Enter: - Under normal User Mode, Press "Signal and Wrinkle Prevent" Keys simultanously for 3 seconds - Then press "Time and Wrinkle Prevent" keys at the same time. • Converting °C °F Celsius(°C) Fahrenheit(°F) -30 -10 10 30 50 70 F =9/5C + 32 -22 14 50 86 122 158 Software Version Mode Definition of Software Version Mode: - While in Service Mode pressing the Temp key will put the dryer into the software version mode How to Enter: - To enter Special Test Mode press Temp Key until the control beep. ex) In case of "U1 05", U1 means major version "U1", 05 means minor version "05". System Check Mode Special Test Mode: - While in Power Off, pressing the Dryness Level + Power keys simultaneously will put the dryer into the System Check mode - " t2 " will display. - System Check Mode Progress t2 mode Function Performed Start/Pause Motor(CW) Relay On Heater Relay On Heater Relay Off Motor(CW) Relay Off (Circulation) 4 Technical_information-02365J_EN.indd 4 2012-06-05 �� 5:08:13