Samsung DV457EVGSWR/AA User Manual Ver.1.0 (English, French, Spanish) - Page 59

06 TROUBLESHOOTING PROBLEM Shuts off before the load is dry Lint on clothes Garments still wrinkled after Wrinkle-Care Odors remain in clothing after Refresh. Water drips from the nozzle when Steam-Care starts Sprayed water is not visible during Steam-Care SOLUTION • The dryer load is too small. Add more items or a few towels and restart the cycle. • The dryer load is too large. Remove some items and restart the dryer. • Make sure the lint filter is cleaned before every load. With some loads that produce high amounts of lint, it may be necessary to clean the filter during the cycle. • Some fabrics are lint producers (for example, a fuzzy white cotton towel) and they should be dried separately from clothes that are lint trappers(for example, a pair of black linen pants). • Divide larger loads into smaller loads for drying. • Check pockets thoroughly before washing and drying clothes. • Small loads of 1 to 4 items work best. • Load fewer garments. • Load similar-type garments. • Fabrics having strong odors should be washed in a normal cycle. • This is steam condensation. The dripping water will stop after a short time. • Sprayed water is difficult to see when the door is closed. INFORMATION CODES Samsung's Smart Care, an automatic error-monitoring system, detects and diagnoses problems at an early stage and provides a quick and easy solution through LCD navigation. When your dryer has a problem, the notification screen will show the information and solution to help you better understand what is occurring with your dryer and how to solve the problem. Information codes may be displayed to help you better understand what is occurring with your Dryer. ERROR DISPLAY TRIGGER tE The thermistor resistance is very low or high. The resistance of the thermistor tE3 for the vent blockage detection is very low or very high. HE Invalid heating Temp in running the dryer dE Running the dryer with door open ACTION TAKEN Clean the screen or vent. If the problem continues, call for service. Clean the screen or vent If the problem continues, call for service. Call for service. Clean the door and then restart. If the problem continues, call for service. Troubleshooting _59 DV457E(G)-02836E_EN.indd Sec6:59 2012-04-09 4:15:51