Samsung DV457EVGSWR/AA User Manual Ver.1.0 (English, French, Spanish) - Page 62
Question, Answer
View all Samsung DV457EVGSWR/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Troubleshooting QUESTION ANSWER Where are the proper place to • Since a washer or dryer is heavy and connected with water, it should install a washer or dryer? be installed in the proper place. Installing the AP near the washer or dryer is recommended. You can check the signal strength through the setup screen of the washer or dryer or a smartphone. • Since the performance is seriously affected by a door or steel wall, install the product in an open place. If there is door in front of the installed product, open the door when using the product. • Do not place an object maden with steel or glass in front of the front LCD of the washer since it blocks the radio signal. • Note that the radio signal may be weaken or interfered and the communication with the smartphone may fail when a microwave oven is used in the house. • Install the washer or dryer so that the front of the product faces the AP if available. How can I connect the washer or dryer with a smartphone stably? • When the signal strenth that is displayed on the LCE of the washer or dryer is weak, the control may fail. Check the mark as follows or measure the signal strength. • At least 3 antenna bars should be displayed on the LCD of the washer or dryer. • At least 3 antenna bars for the Wi-Fi connection should be displayed on the smartphone. • When the signal strenth is measured with a smartphone app that shows the Wi-Fi signal strength, the signal strength should be stronger than -65 dBm. (E.g. -60 dBm and -50 dBm are stronger than -65 dBm.) What should I have to do when the number of the antenna bars that are displayed on the LCD of the washer or dryer is 1? • When the signal strenth that is displayed on the LCE of the washer or dryer is weak, the control may fail. In this case, take the following measures for normal operation. • Move the AP closer to the washer or dryer. (At least 3 antenna bars should be dislayed in the network setup of the washer for proper operation.) • Since old AP may provide lower performance, use new one if available. • Stand the antenna of the AP if available so that the radio signal is more easily propagated. 62_ Troubleshooting DV457E(G)-02836E_EN.indd Sec6:62 2012-04-09 4:15:52