Samsung DVD-N501/XAA User Manual (user Manual) (ver.1.0) (English) - Page 19

Troubleshooting Guide Before requesting service (troubleshooting) Problem No operations can be performed with remote. Disc does not play. The icon appears on screen. Disc Menu doesn't appear. Playback mode differs from the Setup Menu selection. The screen ratio cannot be changed. No audio. Forgot password Will not read disc or other error message. If you experience other problems. Action Page • Check the batteries in the remote. May need replacing. • Operate the remote control at a distance of no more than 20 feet. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote to reset it. Reinstall batteries and try remote again. • Ensure that the disc is installed with the label side facing up. • Check the region number of the DVD. • This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc. Insert a DVD, a VIDEO-CD or a CD. • The features or action cannot be completed at this time because: 1. The DVD's software restricts it. 2. The DVD's software doesn't support the feature (e.g., angles). 3. The feature is not available at the moment. 4. You've requested a title or chapter number or search time that is out of range. P6 P4 P28~30 • Check if the disc has a Menu. P14, 15 • Some of the functions selected in the Setup Menu may not work properly if the disc is not encoded with the corresponding function. P16~20 • The Screen Ratio is fixed on your DVDs. P19 • Make sure you have selected the correct Digital Output in the Audio Options Menu. P18 • Press power on from a cold start with no disc in the unit. Press the STOP and PLAY buttons simultaneously on the front panel for three seconds. "All setup value will be reset to factory settings. Your player will be shut off." will appear. Press the MENU button on the remote control to select the Parental Mode. The Parental Mode is now unlocked as indicated on the display. P20 Press the DOWN button to select Parental. Press ENTER and the Password Check display will appear. Enter the default pass- word of "9999". You can now set your rating level and change your password to a new number. • Turn the player off and unplug it to reset the DVD player. Wait approximately 2 minutes, plug the player back in and turn it on. • Go to the contents and find the section of the instruction book that contains the explanations regarding the current problem, and follow the procedure once again. • If the problem still cannot be solved, please contact your nearest authorized service center. 36 Specifications General Disc Video Output Audio Output Power Requirements Power Consumption Weight Dimensions Operating Temperature Range Operating Humidity Range DVD (DIGITAL VERSATILE DISC) CD : 5" (COMPACT DISC) CD : 31/2" (COMPACT DISC) VCD : 5" Composite Video Component Video S-VIDEO 2 Channel Output Level *Frequency Response *S/N Ratio *Dynamic Range *Total Harmonic Distortion AC 120 V, 60 Hz 15W 6.2lbs 16.9(W) x 9.4(D) x 3.1(H)/inch +41°F to +95°F 10 % to 75 % Reading Speed : 11.45 ft/sec Approx. Play Time (Single Sided, Single Layer Disc) : 135 min Reading Speed : 3.9 to 4.6 ft/sec Maximum Play Time : 74 min Reading Speed : 3.9 to 4.6 ft/sec Maximum Play Time : 20 min. Reading Speed : 3.9 to 4.6 ft/sec. Maximum Play Time : 74 min (Video + Audio) 1 channel : 1.0 Vp-p (75 Ω load) Y : 1.0 Vp-p (75 Ω load) Pr : 0.70 Vp-p (75 Ω load) Pb : 0.70 Vp-p (75 Ω load) Luminance Signal : 1.0 Vp-p (75 Ω load) Color Signal : 0.286 Vp-p (75 Ω load) (L, R) Analog : 2 Vrms (1 kHz) Digital : 1.15 Vp-p 48 kHz Sampling : 4 Hz to 22 kHz 96 kHz Sampling : 4 Hz to 44 kHz 110 dB 92 dB 0.003 % (In case of 1 KHz) *: Nominal specification • Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. • Weight and dimensions are approximate. 37 REFERENCE