Samsung DVD-P401/XAA User Manual (user Manual) (ver.1.0) (English) - Page 9

SETUP Description-Rear Panel Rear Panel 1 DIGITAL AUDIO OUT JACKS • Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder. 2 ANALOG AUDIO OUT JACKS • Connect to the Audio input jacks of your television, audio/video receiver, or VCR. 3 VIDEO OUT JACK • Use a video cable to connect to the Video input jack on your television. • The VIDEO OUT SELECT switch must be set to the 525I(480I) position. 4 S-VIDEO OUT JACK • Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture. • The VIDEO OUT SELECT switch must be set to the 525I(480I) position. 5 COMPONENT VIDEO OUT JACKS • Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with S-Video, Component Video provides the best picture quality. • If 525P(480P) VIDEO is selected, pro g ressive scan mode will work. • If 525I(480I) VIDEO is selected, interlaced scan mode will work. 6 VIDEO OUT SELECT SWITCH • Use the switch to set video out. • If 525P(480P) VIDEO is selected, VIDEO and S-VIDEO will not work. Important Note Consult your TV User's Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User's Manual's instructions regarding Progressive Scan settings in the TV's menu system. 9