Samsung DVD-R120 User Manual (user Manual) (ver.1.0) (English) - Page 35
Setting up the Audio Options, Audio Options
View all Samsung DVD-R120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
System Setup Setting up the Audio Options 5 Press the ...† buttons to select the desired item, then press the OK or √ button. You can connect the DVD Recorder to an external amp or Home Theater. Allow you to setup the Audio device and sound status depending on the audio system in use. 1 With the unit in Stop mode/No Disc mode, press the MENU button. No Disc Timer Record Programme Video Plus+ √ Setup Timer Record √ Video Plus+ Extended : Off √ MOVE OK RETURN EXIT 2 Press the ...† buttons to select Setup, then press the OK or √ button. No Disc Programme Setup System Clock Set Language Audio Video Parental Control Install Setup MOVE OK RETURN EXIT 3 Press the ...† buttons to select Audio, then press the OK or √ button. Audio setup menu will be displayed. No Disc Audio Programme Digital Output : PCM √ Setup DTS : Off √ Dynamic Compression : On √ I Press the RETURN or œ button to return to the previous menu. NOTE Press the MENU button to exit the menu. Audio Options Digital Output 1. PCM : Select this when you have no equipment that can decode Dolby Digital (or MPEG-2) signal. When you play Dolby Digital (or MPEG-2) sound track, the digital output are converted to PCM Stereo. 2. Bitstream : Output Dolby Digital (or MPEG-2) audio as bitstream. Select this when your AV receiver or AV amplifier have Dolby Digital (or MPEG-2) Decoder. I Digital output setting is equally applied to NOTE both Dolby Digital and MPEG-2 audio. LPCM sound track is always outputted as PCM. It has no relation with Digital Output setting. I Be sure to select the correct Digital Output or you will hear no sound or loud noise. DTS 1. Off : Doesn't output DTS signal. Select this when your AV receiver or AV amplifier does not have DTS decoder. 2. On : Outputs DTS Bitstream via digital output when you play DTS track. Select this only when your AV receiver (or AV amplifier) have DTS decoder. MOVE OK RETURN EXIT 4 Press the ...† buttons to select the desired audio option, then press the OK or √ button. No Disc Audio Programme Digital Output P:CPMCM √ Setup DTS B:itOsftfream √ Dynamic Compression : On √ MOVE OK RETURN EXIT I When DTS soundtrack is played, sound does not output from AV Audio Output. NOTE Dynamic Compression This is only active when a Dolby Digital signal is detected. 1. Off : You can enjoy the movie with the standard Dynamic Range. 2. On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud. English -35