Samsung DVD-R120 User Manual (user Manual) (ver.1.0) (English) - Page 45

Recording from external equipment you are watching Before you start Check that the disc has enough available space for the recording. Adjust the recording mode. 1 Press the OPEN/CLOSE button, place a recordable disc on the disc tray. 2 Press the OPEN/CLOSE button to close the disc tray. Wait until "LOAD" disappears from the front panel display. If an unused DVD-RAM disc is used, whether to format or not will be asked first. (See page 42) If an unused DVD-RW disc is used, whether to initialize or not will be asked first. (See page 42) 3 Press the INPUT button to select the input source according to the connection you made. The front panel display changes in the following sequence: © PR Number © AV1 © AV2 © AV3 © DV If you connect a digital camcorder, press the INPUT button to select DV. (See page 46) 5 Press the REC button. To pause recording Press the button to pause a recording in progress. G Press the recording. button again to resume G You can switch channels by pressing the PROG ( / ) buttons while recording pauses. To stop recording Press the STOP ( ) button to stop or finish a recording in progress. G When using DVD-RAM/DVD-RW/DVD-R discs, the message 'Updating the information of disc. Please wait for a moment' is displayed. I You can not change the recording mode and input source while recording or NOTE Pause. I Recording will stop automatically if there is no free space left for recording. I Up to 99 titles can be recorded onto a disc. I Recording will stop automatically if a copy protected image is selected. I DVD-RAM/DVD-RW discs must be formatted before starting to record. Most new discs are sold unformatted. I Do not use DVD-R authoring discs with this unit. 4 Press the REC MODE button repeatedly, (or press the REC MODE button, then press the ...† button) to select the recording speed(quality). © SP © LP © EP © XP Record Mode SP (02:12) Recording English -45