Samsung DVD-R120 User Manual (user Manual) (ver.1.0) (English) - Page 49

Recording 4 Press the OK button. G will appear on the front panel. It means that a timer recording is registered. If the timer settings overlap The programmes are recorded in order of priority. If timer recording is set for the first programme and then again for the second programme and both programmes overlap, the following message will appear on the screen: "This setting is identical with 1"The message shows that the first programme has priority. After recording of the first program is complete, the second program starts being recorded. To exit without saving the current setting Press the MENU button. To return to the previous menu Press the RETURN button if you don't want to set a timer recording. 5 Turn the power off to finish the Timer Recording setting. Timer Recording will not work when the power is on. G will blink if disc is not inserted. I The timer recording time may differ from NOTE the set time depending on disc status and overall timer recording status (for example, recording times overlapping, or when the previous recording ends within 2 minutes before the start time of the next recording.) I You can make the Timer Recording up to 12 programmes. Editing the Scheduled Record List Follow these directions to edit the timer record list. 1 With the unit in Stop mode, press the TIMER button. DVD-RAM(VR) Timer Record Disc Navigation Video Plus+ √ Timer Record √ Playlist Video Plus+ Extended : Off √ Disc manager Programme Setup MOVE OK RETURN EXIT Using the MENU button. G With the unit in Stop mode mode, press the MENU button. G Press the ...† buttons to select Programme, then press the OK or √ button. G Press the ...† buttons to select Timer Record. 2 Press the OK or √ button. Flexible Recording (for Timer recording only) 3 Press the RETURN button to close the Timer Recording screen. DVD-RAM(VR) Scheduled Record List Recordable Time 02:12 SP No. Source 01 -- -Source Date -- - -Date Start End Mode PDC Edit No. 01 Start End Mode PDC PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP Off Recordable Time 02:12 SP MOVE OK RETURN EXIT In FR mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording. This function is selected only one mode in XP, SP, LP and EP modes and you can use this mode for timer recording. The FR mode recording setup is the same as Timer Recording. When setting the mode in step 3, set FR Mode. 4 Press the ...† buttons to select the number of the timer recording you want to edit, then press the OK or √ button. G The Edit and Delete items are displayed. DVD-RAM(VR) Scheduled Record List Recordable Time 02:12 SP No. Source Date Start End Mode PDC Edit 01 PR 01 01 JAN 12 : 00 14 : 00 SP OEfdfit √ 02 D-elete √ MOVE OK RETURN EXIT English -49