Samsung DVG50R5400W/A3 User Manual - Page 18
Electric models, Grounding, Gas models - U.S. and Canada, Electric models - U.S. only
View all Samsung DVG50R5400W/A3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installation requirements Installation requirements Electric models WARNING • Your dryer has an optional cord with an equipment-grounding conductor and a grounding plug. This cord is sold separately. • The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. • Do not modify the plug provided with your dryer - if it doesn't fit the outlet, have a proper outlet installed by a qualified electrician. • If a power cord is not used and the electric dryer is to be permanently wired, the dryer must be connected to a permanently grounded metal wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the dryer. Electrical connections Before operating or testing, follow all grounding instructions in the "Grounding" section. An individual branch (or separate) circuit serving only your dryer is recommended. Do not use an extension cord. Gas models - U.S. and Canada A 120 volt, 60 Hz AC approved electrical service with a 15-ampere fuse or circuit breaker is required. Electric models - U.S. only Most U.S. dryers require a 120 / 240 volt, 60 Hz AC approved electrical service. Some require 120 / 208 volt, 60 Hz approved electrical service. The electric service requirements can be found on the data label located behind the door. A 30-ampere fuse or circuit breaker on both sides of the line is required. • If a power cord is used, the cord should be plugged into a 30-ampere receptacle. • The power cord is not provided with U.S. electric model dryers. This cord is sold separately. 18 English Untitled-16 18 2020-07-14 3:36:14