Samsung DVG50R5400W/A3 User Manual - Page 32
Exhaust ducting guide, Switching the door position, Ducting, Cleaning
View all Samsung DVG50R5400W/A3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installation Installation Exhaust ducting guide Ducting 1. Make sure the dryer is installed properly so the air exhausts freely. 2. Use 4-inch rigid metal ducts. Tape all joints including the dryer connection. Never use lint-trapping screws. 3. To facilitate the exhaust, keep the ducts as straight as possible. Cleaning Clean all old ducts before installing the dryer, and make sure the vent flap opens and closes freely. We recommend that you to clean the exhaust system annually or on a regular basis. WARNING • To prevent fire, do not use plastic, thin-foil, or non-metal flexible ducts of any kind. • Do not use a poor exhaust system because it slows down the dryer's performance. • Do not use excessively long ducts that have multiple elbows. • Do not use crushed or clogged venting or ducts. Switching the door position To reverse the direction of the door, we recommend that you contact a qualified technician. 1. Put a soft rug on the floor to rest the door on after you have removed it. This will prevent the door from being scratched. 2. Unplug the power cord of the dryer. 3. Remove the four hinge screws from the door, and then remove the door by lifting it up slightly. 32 English Untitled-16 32 2020-07-14 3:36:18