Samsung F2080 Quick Guide (ENGLISH) - Page 11

The display area suddenly moves to an edge or to the center. Did you change the graphics card or the driver? Did you change the resolution and frequency appropriate to the product? Please press the [AUTO] button to run the auto adjustment function. Set the resolution and the frequency to the appropriate values in the graphics card refer to the (Standard Signal Mode Table) Is the graphics card configured correctly? Set up the graphics card referring to the user manual. The pictures are out-of-focus. Did you change the resolution and the frequency appropriate to the product? Set the resolution and the frequency to the appropriate values in the graphics card refer to the (Standard Signal Mode Table) The color is displayed in 16 bit (16 colors). The color has been changed after changing the graphics card. Did you install the device driver for the product? Windows ME/XP/2000 : Set the color again by selecting Con- trol Panel → Display → Settings. Is the graphics card configured correctly? Configure the color again in accordance with the new graphics card driver. When I connect the monitor, the 'Unknown monitor, Plug&Play (VESA DDC) monitor found' message is displayed. Did you install the device driver for the product? Check if all the Plug&Play (VESA DDC) functions are supported referring to the User Manual of the graphics card. Install the device driver referring to the descriptions about the driver installation. Install the device driver referring to the descriptions about the driver installation. When I look at the exterior edges of the product, small alien substances appear on it. Since this product is designed so that the color has a soft appearance by coating it with a transparent material over the black edges, such things may be seen. This is not a defect of the product. A "beep, beep" sound is heard when booting the computer. If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer. 2-3 FAQ FAQ! How can I change the frequency of the video signal? Please try the following! You have to change the frequency of the graphics card. (For more information, refer to the User Manual of the computer or the graphics card.) 2-3 Troubleshooting