Samsung HP-S4253 User Manual (ENGLISH) - Page 91

Note Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Video Signal Resolution Vertical Horizontal (Dot X Line) Frequency (Hz) Frequency (KHz) 640 X 350 720 X 400 640 X 480 IBM PC / AT Compatible 800 X 600 1024 X 768 1280 X 720 1360 X 768 70.086 70.087 59.940 70.000 72.809 75.000 56.250 60.317 70.000 72.188 75.000 60.004 70.069 72.000 75.029 59.855 60.015 31.469 31.469 31.469 35.000 37.861 37.500 35.156 37.879 43.750 48.077 46.875 48.363 56.476 57.672 60.023 44.772 47.712 Vertical Polarity N P N N/P N N N/P P N/P P P N N N/P P P P Horizontal Polarity HP-S4253 HP-S5053 P ✔ ✔ N ✔ ✔ N ✔ ✔ N/P ✔ ✔ N ✔ ✔ N ✔ ✔ N/P ✔ ✔ P ✔ ✔ N/P ✔ ✔ P ✔ ✔ P ✔ ✔ N ✔ ✔ N ✔ ✔ N/P ✔ ✔ P ✔ ✔ N ✔ P ✔ • The interlace mode is not supported. • The TV operates abnormally if a non-standard video format is selected. • The table above conforms to IBM/VESA regulations and is based on using the Analog Input. • A "✔" mark means that this mode can be supported. Notes • The PC text quality of HP-S4253 is optimum in XGA mode (1024 x 768@60Hz). • The PC text quality of HP-S5053 is optimum in WXGA mode (1360 x 768@60Hz). • When this TV is used as a PC display, 32-bit color is supported. • Depending on the manufacturer, your PC display screen might appear different. (and depending on your particular version of Windows.) Check your PC instruction book for information about connecting your PC to a TV. • If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4KHz (horizontal). • In some cases, abnormal signals (such as stripes) might appear on the TV screen when the PC power is turned off (or if the PC is disconnected). If so, press the SOURCE button on the remote control or SOURCE button on the side panel to enter a VIDEO mode. Also, make sure that the PC is connected. 91