Samsung HP-T5044 Quick Guide (easy Manual) (ver.1.0) (English) - Page 34

Changing the Position of the PIP Window 4 Press the ▲ or ▼ button to select Position, then press the ENTER button. Press the ▲ or ▼ button to select the desired PIP window position, then press the ENTER button. ➢ In Double Window ( ) and Double Wide ( ) modes, Position cannot be selected. ➢ If the PIP window is set to Double Window ( ) or Double Wide ( ) mode, the screen size or alignment may slightly differ depending on the signal type. Changing the PIP Channel 5 Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button at the bottom of the remote to select the desired channel in the PIP window, then press the ENTER button. ➢ The channel can be active when the sub picture is set to TV. Press the EXIT button to exit. Press the PIP CH and CH and buttons on the remote control to change the PIP channel. T V PIP Size Position Channel PIP : On : : : Air 3 Move Enter Return T V PIP Size Position Channel PIP : On : : : Air 3 ▲ Ai▲r 3 RETURN Move Enter Return FAV.CH Freezing the Current Picture RETURN 1 Press the STILL button to freeze a moving picture. ➢ Normal sound will still be heard. Press again to cancel. ➢ To prevent screen burn-in, this function will automatically cancel after 5 FAV.CH minutes. ➢ While V-Chip is in operation, the Still function cannot be used. English - 34