Samsung HW-D450 User Manual (user Manual) (ver.1.0) (English, French) - Page 14

USE iPod/iPhone WiTH A WiRElESS DOcK cRADlE FOR iPod/iPhone (Sold Separately (HT-WDc10)) You can enjoy finer quality of music through the speaker by sending iPod/iPhone's audio signal using a Wireless Transmitter. To link the main unit with wireless transmitter, you have to make ID setting when both main unit and wireless transmitter are turned on. Turn on the main unit and connect the iPod/iPhone to the Wireless transmitter. Then press inpuT SeleCT button on the remote control to select "W iPod" mode. The inpuT SeleCT mode of the main unit will switches as follows. Repeatedly press DIGI.1 ➡ DIGI.2 ➡ ANALOG ➡ W iPod ( See page 18 ) The Sound bar will not be turned off if iPod/iPhone is not connected to the Wireless Transmitter. For more information on HT-WDC10, refer to the HT-WDC10's user manual. HOW TO linK THE WiRElESS TRAnSMiTTER WiTH THE MAin UniT Set an ID of the Subwoofer before setting a Transmitter ID. ( See page 12 ) 1. Turn off your Home Theater (HW-D450, HW-D451). 2. Press the hold "3D SOUnD" button on the remote control for 5 seconds. The standby light on the HW-D450, HW-D451 will blink once. 3. Connect the iPod/iPhone to the Wireless transmitter. 4. Turn on the iPod/iPhone. Press the "iD SET" button on the back of the Wireless transmitter for 5 seconds. The link light on the wireless transmitter will blink fast. 5. Turn on your Home Theater(make sure the wireless transmitter's Link LED in ON). To listen to music from your iPod/iPhone over the Home Theater, select the iPod mode as the Home Theater's source. • You can control the speaker volume of iPod/iPhone with a volume wheel or a volume bar. • When iPod/iPhone is stopped or in a power saving mode, a Wireless transmitter is turned to the Sleep Mode. When iPod/iPhone is turned to the Deep Sleep Mode, the Wireless transmitter is off. POWER TV POWER TV INFO VOL MUTE TV CH 3D SOUND SOUND MODE S.VOL DIMMER INPUT SELECT DRC AUTO POWER SPK CONTROL HDMI S/W LEVEL AV SYNC AH59-02330A AUDIO POWER TV POWER TV INFO LINK VOL STANDBY MUTE CHARGE TV CH 3D SOUND SOUND MODE S.VOL DIMMER INPUT SELECT DRC AUTO POWER SPK CONTROL HDMI S/W LEVEL AV SYNC AH59-02330A AUDIO ▪ If you use the main unit nearby a wireless device such as a laptop computer, an AP, or Wifi, any unstable operation error can happen. ▪ Do not pairing the subwoofer and iPod/iPhone at the same time. If you pairing at the same time, iPod/iPhone and subwoofer may not connect to the Sound bar. iPod/iPhone MODElS THAT cAn BE USED WiTH THiS PRODUcT iPod touch (1st, 2nd, 3rd, and 4th generation) iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) iPhone 3g iPod classic iPhone 4 iPhone iPod with video iPhone 3gS ▪ "Made for iPod," and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. ▪ iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. ▪ The volume control may not be operated normally except at the referred models. If there is any error happened at the models above, please update the software of iPod/iPhone at the lastest version. 1