Samsung HW-D450 User Manual (user Manual) (ver.1.0) (English, French) - Page 15

EnG connecting the CRYSTAL SURROUND AIR TRACK This section explains two ways (digital and analog) of connecting the unit to the TV. This unit is equipped with two optical digital jacks and one audio analog jack for connecting a TV. ONLY FOR UPDATE ● connections DIGITAL AUDIO IN 2 OPTICAL ADUIDGIIOTAINL 1 AUDIO IN Audio Cable DIGITAL AUDIO IN 1,2 White AUDIO OUT L or R Red OPTICAL or OUT Optical Cable BD/DVD player/ Set-top box/ Game console AUDIO IN Connect AUDIO IN on the main unit to the AUDIO OUT of the TV or Source Device. Be sure to match connector colors. or, OPTICAL DIGITAL IN 1,2 Connect the Digital Input on the main unit to the OPTICAL OUT of the TV or Source Device. ▪ Do not connect the power cord of this product or your TV to the wall outlet until all connections between components are complete. ▪ Before moving or installing this product, be sure to turn off the power and disconnect the power cord. ▪ If you select 'ANALOG' without connecting the Audio Cable, the set is turned off automatically after 20 minutes. ▪ If a TV or any device connected to Air Track with the optical cable is off and there is no digital input, the Air Track is turned off after 20 minutes. (If there has been no input signal for over 20 minutes from DIGITAL AUDIO IN 1 or 2, the Air Track will be turned off.) ▪ When Air Track isn't linked with HT-WDC10 model in the W.iPod mode, Air Track will turn off after 20 minutes. 15