Samsung HW-LS60D/ZA User Manual - Page 15

Using the Spacefit sound Provides optimized sound quality by analyzing the listening spaces. Method 1. Connecting via Wireless Speaker 1. Run the SmartThings app on your mobile device. 2. Tap Wireless Speaker's card. 3. Enable Spacefit sound. • This is available in all Sound modes. Method 2. Connecting via TV To enable this function, turn on the Adaptive Sound+ mode on your Samsung TV menu. (Home ( ) → Menu → Settings ( ) → All Settings ( ) → General → Intelligent Mode Settings → Adaptive Sound+) • The sound mode on your Wireless Speaker will automatically change to Adaptive Sound+ if you enable the Adaptive Sound+ mode on your TV. NOTE • This function works when the Wireless Speaker connects to some of the Samsung TVs. 07 CONNECTING AN EXTERNAL DEVICE Connecting using an Optical Cable Pre-connection Checklist Make sure both the external device and the Wireless Speaker are turned off. BD / DVD player / Set-top box / Game console Optical Cable (not supplied) Rear of the Wireless Speaker D.IN (OPTICAL) OPTICAL OUT LED indicator : ‒ White On → Off Digital Audio In 1. Use an optical cable (not supplied) to connect the D.IN (OPTICAL) port of the Wireless Speaker and the optical output port of the external device. See the figure below. 2. Turn on both the Wireless Speaker and the external device. 3. Press the (Multi Function) button on the Wireless Speaker unit and then select the "Digital Audio In" mode. Then the announcement, "Digital Audio In" is output. 4. The audio signal of the external device will sound from the Wireless Speaker. ENG - 15