Samsung HW-LS60D/ZA User Manual - Page 19

10 SOFTWARE UPDATE Auto Update When the Wireless Speaker is connected to the Internet, software updates automatically occur even when the Wireless Speaker is turned off. • To use the Auto Update function, the Wireless Speaker must be connected to the Internet. The Wi-Fi connection to the Wireless Speaker will be terminated if the Wireless Speaker's power cord is disconnected or the power is cut off. If the power is cut off, when the power comes back on or you reconnect the power cord, turn on the Wireless Speaker, and then reconnect it to the Internet. USB Update • If there is no update file available, the indicator blinks red 3 times. LED indicator : ‒ Red Blinks X3 • If the update file is in the same or lower version than the existing, the indicator blinks cyan 3 times. LED indicator : ‒ Cyan Blinks X3 Reset SMARTTHINGS DONGLE 5 Sec Rear of the Wireless Speaker Samsung may offer updates for the Wireless Speaker's system firmware in the future. When an update is available, you can update the Wireless Speaker by connecting the USB drive that contains the update firmware to the SMARTTHINGS DONGLE port of the Wireless Speaker. 1. Go to (www.samsung.com) → search for the model name from the customer support menu option. • For more information about update, refer to Upgrade Guide. 2. Download the upgrade file (USB type). 3. Unzip the file to create a folder with the file name. 4. Store the created folder in a USB and then connect it to the Wireless Speaker. 5. Turn on the Wireless Speaker. Then the product is updated within 3 minutes. LED indicator : ‒ White moves from left to right and right to left • During update, do not turn it off or remove the USB. • If the yellow LED is on after the software update is completed, this means that an additional update is in progress. When this happens, don't turn off the power or remove the USB. • If update does not proceed, reconnect the Wireless Speaker power cord. • When the latest version is installed, no update is performed. • Depending on the USB type, update may not be supported. With the Wireless Speaker on, press the (Volume) buttons on the body at the same time for at least 5 seconds. The LED indicator changes as shown below and then the Wireless Speaker is reset. LED indicator ‒ White moves from left to right and right to left ‒ Cyan Blinks X3 ‒ Red Blinks X3 CAUTION • All the settings of the Wireless Speaker are reset. Be sure to perform this only when a reset is required. Security updates information Security updates are provided to strengthen the security of your device and protect your personal information. For more information on security updates, visit https://security.samsungtv.com. • The website supports only some languages. ENG - 19