Samsung HW-LS60D/ZA User Manual - Page 17
Installing The Wall, Mount
View all Samsung HW-LS60D/ZA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
09 INSTALLING THE WALL MOUNT Installation Precautions • Install on a vertical wall only. • Do not install in a place with high temperature or humidity. • Verify whether the wall is strong enough to support the product's weight. If not, reinforce the wall or choose another installation point. • Connect cables from the unit to external devices before you install the Wireless Speaker on the wall. • Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock. • Make sure you use the wall-mount component parts provided with this product. Under any circumstances, any accident resulting from using third-party parts shall not be covered by the warranty. Wallmount Components 1. Place the Wall Mount Guide against the wall surface. • The Wall Mount Guide must be level. • If you are mounting a device below a mounted object, install at least 4inches (10cm) apart. 4 inches (10 cm) or more 2. Use a pen to mark the positions of the holes and remove the Wall Mount Guide. (A) Wall Mount Guide (AH81-17401A) x 1 x 2 (B) Bracket-Wall Mount (AH61-04298A) x 2 (D) Screw Anchor (BN61-17904A) x 2 (M5 X L55) (C) Screw (6011-008215) x 1 (E) Holder-Screw (AH61-03164A) (F) Spacer (AH81-17402A) 3. Using an appropriately sized drill bit, drill a hole in the wall at each marking. • If the markings do not correspond to the positions of studs, make sure you insert appropriate anchors or mollies into the holes before you insert the support screws. If you use anchors or mollies, make sure the holes you drill are large enough for the anchors or mollies you use. 4. Push a screw (not supplied) through each Screw, and then screw each screw firmly into a support screw hole. (B) (C) ENG - 17