Home » Samsung Manuals » Flat Panel Televisions » Samsung LNS4695DX » Manual Viewer

Samsung LNS4695DX User Manual (ENGLISH) - Page 12

Connecting a VCR, Connecting an S-VHS VCR, VCR Rear Panel, RF Cable Not supplied

Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 8-9). Skip step 1 if you have not yet connected to an antenna or a cable system. ANT 1 IN ANT 2 IN (AIR) (CABLE) 1. Unplug the cable or antenna from the back of the TV. VCR Rear Panel TV Rear Panel 2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. 3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT 1 IN (AIR) or ANT 2 IN (CABLE) terminal on the TV. 5 Audio Cable (Not supplied) 2 4 Video Cable (Not supplied) 3 RF Cable (Not supplied) Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. We recommend the use of cables with a Ferrite Core. 4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 (or AV IN 2) [VIDEO] jack on the TV. 5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 (or AV IN 2) [R-AUDIO-L] jacks on the TV. If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables. Connecting an S-VHS VCR Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.) VCR Rear Panel TV Rear Panel 3 Audio Cable (Not supplied) 2 S-Video Cable (Not supplied) 1 RF Cable (Not supplied) An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.) Each S-VHS VCR has a different back panel configuration. When connecting an S-VHS VCR, match the color of the connection terminal to the cable. We recommend the use of cables with a Ferrite Core. 1. To begin, follow steps 1-3 in the previous section to connect the antenna or cable to your VCR and your TV. 2. Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN1 [S-VIDEO] jack on the TV. 3. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN1 [R-AUDIO-L] jacks on the TV. English-10

Section	Page
Cover	1
Precautions When Displaying a Still Image	2
Contents	3
General Information	5
List of Features	5
Accessories	5
Viewing the Control Panel	6
Viewing the Connection Panel	7
Remote Control	9
Installing Batteries in the Remote Control	10
Connections	10
Connecting VHF and UHF Antennas	10
Connecting a VCR	12
Connecting an S-VHS VCR	12
Connecting a Camcorder	13
Connecting a DVD Player	13
Connecting a DVD Player/Set-Top Box via DVI	14
Connecting a DVD Player/Set-Top Box via HDMI	14
Connecting a Digital Audio System	15
Connecting an Amplifier/DVD Home Theater	15
Connecting a PC	16
Operation	17
Turning the TV On and Off	17
Plug & Play Feature	17
Dynamic Menus and On-Screen Displays	19
Navigating Menus by Using the Menu Map	20
Selecting a Menu Language	21
Memorizing Channels	22
Changing Channels	24
Setting Up Your Remote Control	25
Remote Control Codes	27
Setting the Clock	30
Setting the On/Off Timer	32
Setting the Sleep Timer	33
Viewing an External Signal Source	34
Assigning Names to External Input Mode	35
Channel Control	36
Selecting Your Favorite Channels	36
Viewing the Channel Lists	37
Adding and Erasing Channels	38
Labeling the Channels	39
Fine Tuning Analog Channels-Analog	40
Checking the Digital-Signal Strength-Digital	41
LNA (Low Noise Amplifier)	41
Picture Control	42
Picture Control	42
Customizing the Picture Settings	43
Changing the Picture Size	45
Using the ColorWeakness Enhancement Feature	46
Digital Noise Reduction	47
DNIe (Digital Natural Image engine)	48
Setting the Film Mode	49
Viewing Picture-In-Picture	50
Changing the Size of the Sub (PIP) Picture	51
Changing the Location of the Sub (PIP) Picture	51
Changing the Channel of the Sub (PIP) Picture	52
Freezing the Picture	53
Setting the Blue Screen Mode	53
Sound Control	54
Sound Control	54
Customizing the Sound	55
Setting the SRS TruSurround XT	56
Auto Volume	57
Choosing a Multi-Channel Sound (MTS) track-Digital	58
Choosing a Multi-Channel Sound (MTS) track-Analog	59
Selecting the Internal Mute	60
Selecting the Sound Select	61
Setting the On/Off Melody	62
Special Features	63
Setting the Function Help	63
Using the Energy Saving Feature	64
Menu Transparency Level	64
Using Game Mode	65
Using the V-Chip	66
How to Enable/Disable the Rating Controls	67
How to Set up Restrictions Using “TV Parental Guidelines”	68
How to Set up Restrictions Using “MPAA Rating”	69
Important Notes About Parental Locks	70
How to Set up Restrictions Using Canadian English	71
How to Set up Restrictions Using Canadian French	72
Using the V-Chip for Digital channels	73
Viewing Closed Captions (On-Screen Text Messages) -Analog	74
Viewing Closed Captions (On-Screen Text Messages)-Digital	75
Setting the Blue Eye	77
PC Display	78
Setting Up Your PC Software (Windows Only)	78
Display Modes	78
Adjusting the Picture Quality	79
Changing the Picture Position	80
Adjusting the Picture Quality and Position Automatically	81
Changing the Picture Size (PC Mode)	82
Viewing the Current Resolution	83
Initializing the Picture Settings	84
Appendix	85
Identifying Problems	85
Installing the Stand	86
Disconnecting the Stand	86
Stand Swivel Function	86
Installing the Wall Mount Kit (LN-S4095D)	87
Installing the Wall Mount Kit (LN-S4695D)	88
Using the Anti-Theft Kensington Lock	90
Specifications	90
Dimensions (LN-S4095D)	91

Match case Limit results 1 per page

English-10

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions

on pages 8-9). Skip step 1 if you have not yet connected to an antenna or a cable system.

Unplug the cable or

antenna from the back

of the TV.

Connect the cable or

antenna to the ANT IN

terminal on the back

of the VCR.

Connect an RF Cable

between the ANT OUT

terminal on the VCR and

the ANT 1 IN (AIR) or

ANT 2 IN (CABLE)

terminal on the TV.

Connect a Video Cable

between the VIDEO OUT

jack on the VCR and the

AV IN 1 (or AV IN 2)

[VIDEO] jack on the TV.

Connect Audio Cables

between the AUDIO OUT

jacks on the VCR and

the AV IN 1 (or AV IN 2)

[R-AUDIO-L] jacks

on the TV.

If you have a “mono”

(non-stereo) VCR, use a

Y-connector (not supplied)

to hook up to the right

and left audio input jacks

of the TV. If your VCR

is stereo, you must

connect two cables.

ANT 2 IN

(CABLE)

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

Each VCR has a different back panel configuration.

When connecting a VCR, match the color of the connection terminal to the cable.

We recommend the use of cables with a Ferrite Core.

VCR Rear Panel

TV Rear Panel

RF Cable (Not supplied)

Video Cable (Not supplied)

Audio Cable (Not supplied)

ANT 1 IN

(AIR)

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.

(This connection delivers a better picture as compared to a standard VHS VCR.)

To begin, follow steps 1–3

in the previous section to

connect the antenna or

cable to your VCR and

your TV.

Connect an S-Video Cable

between the S-VIDEO OUT

jack on the VCR and the

AV IN1 [S-VIDEO] jack on

the TV.

Connect Audio Cables

between the AUDIO OUT

jacks on the

VCR and the

AV IN1 [R-AUDIO-L] jacks

on the TV.

An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)

Each S-VHS VCR has a different back panel configuration.

When connecting an S-VHS VCR, match the color of the connection terminal to the cable.

We recommend the use of cables with a Ferrite Core.

VCR Rear Panel

TV Rear Panel

RF Cable (Not supplied)

S-Video Cable (Not supplied)

Audio Cable (Not supplied)