Samsung NP-P430C Trouble Shooting Guide Ver.2.0 (English) - Page 79
Internet Protocol Version 4TCP/IPv4
View all Samsung NP-P430C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
4 ▶ For Windows 7 / Vista Select Internet Protocol Version 4(TCP/IPv4) from the list of Network Components and click Properties. 5 Configure the IP settings. When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually. ▶ For Windows XP Click General tab and select a LAN driver from Connect using:. Select Internet Protocol(TCP/ IP) and click Properties. The displayed LAN driver may vary depending on the LAN device type. Click Install to add a network component as shown in the figure below: You can add a client, a service, or a protocol. The Network Component name may differ depending on the Operating System Installed. To add a network component, click Install in the screen shown in the figure above. You can add clients, services, and protocols. When not using DHCP, ask your network administrator for the IP address. 6 When you have completed the settings, click the OK button. The network settings have been completed. 79