Samsung NP600B4C User Manual Windows 7 User Manual Ver.1.3 (English) - Page 58
Connecting through the HDMI port Optional, LCD+HDMI Clone, LCD+HDMI Dual View
View all Samsung NP600B4C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Connecting an External Display Device Chapter 2. Using the computer 57 Connecting through the HDMI port (Optional) By connecting the computer to a TV with a HDMI port, you can enjoy both a high visual quality and a high sound quality. After connecting a TV through HDMI, you have to configure the screen and sound. 1 Connect the HDMI cable to the HDMI port of the TV. External Monitor TV Projector 2 Press the + key combination once. Then the setting screen appears where you can select the monitor mode. Since pressing the key while holding down the key changes the selection, select a display device. HDMI LCD+HDMI Clone LCD+HDMI Dual View •• This is only supported for models that support a TV output port (HDMI). •• When a TV provides more than one HDMI port, connect the computer to the DVI IN port. •• When connecting the computer to a TV, switch the external input mode of the TV to HDMI. •• External Monitor / TV is not supported in the DOS Command Prompt window. •• Simultaneous output to all 3 (LCD + CRT + HDMI) is not supported. •• If the screen is not switched even if you press the + key combination, you have to install the Easy Settings program.