Samsung NP600B4C User Manual Windows 7 User Manual Ver.1.3 (English) - Page 81
When you have to register again to erase the, authentication information on the TPM chip
View all Samsung NP600B4C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Using the TPM Security Device (Optional) Chapter 2. Using the computer 80 When the virtual drive (PSD) does not appear You can only use the virtual drive (PSD) when you have selected the Personal Secure Drive (PSD) option during the program registration. If you have not selected the option during the registration, complete the following steps. 1 Click start > All Programs > Infineon Security Platform Solution > Manage Security Platform and click the User Settings tab > Security Platform Features and then Configure. 2 When the Initialization Wizard appears, select Personal Secure Drive (PSD) and enter the user password. 3 Click Next several times according to the instructions of the Initialization Wizard to finish the wizard. When the virtual drive (PSD) is not loaded To use the virtual drive (PSD), the virtual drive (PSD) should be loaded first. If it is not loaded, you can load it according to the procedures below. 1 Right-click over the Security Platform icon in the system tray of the Taskbar and select Personal Secure Drive > Load from the pop-up menu. 2 In the load window, enter the basic user password and click OK. 3 If you click Start > Computer, you will be able to confirm that the Personal Secure Drive is created. Note that when you have copied confidential data to the PSD, the original data files are not encrypted. When you have to register again (to erase the authentication information on the TPM chip) To register a user again, you need to delete the existing authentication information saved on the TPM chip and then clear the TPM chip. Register the user in the following order. 1 Delete the virtual drive. 2 Delete the existing authentication information saved on the TPM chip.