Samsung NX58M6650WG/AA User Manual - Page 46

Fault Interrupter GFI or, Installation Instructions.

Get Samsung NX58M6650WG/AA PDF manuals and user guides View all Samsung NX58M6650WG/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Troubleshooting Problem Steam or smoke coming from under the control panel. Possible cause This is normal. A burning or oily odor coming from the vent. A strong odor. This is normal for a new oven and will disappear within 1/2 hour of the first bake cycle. This is temporary. Oven racks are This is normal. difficult to slide. Fan noise. This is normal. The convection fan is not working. This is normal. Action The oven vent is located there. More steam is visible when you use the convection functions or when baking or roasting multiple items at the same time. To speed the process, set a selfcleaning cycle for a minimum of 3 hours. (See page 39 and 40.) The insulation around the inside of the oven emits an odor the first few times the oven is used. Apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven racks with the paper towel. Racks become dull and hard to slide if they are left in the oven during a self-clean cycle. The convection fan runs until the function is over or the door is opened. The fan starts automatically when the oven reaches the preheat temperature. 46 English Others Problem Possible cause The product is not level. The appliance has been installed improperly. The leveling leg(s) is (are) damaged or uneven. The display goes blank. Food does not bake or roast properly in the oven. The kitchen cabinets are not properly aligned and make the range appear to be not level. The electrical outlet Ground Fault Interrupter (GFI or GFCI) has been tripped and needs to be reset. Your digital control has been damaged. The wrong cooking mode is selected. The oven racks have not been positioned properly for the foods being cooked. Incorrect cookware or cookware of improper size is being used. The oven thermostat needs adjustment. There is aluminum foil on the racks and/or oven bottom. The clock or timers are not set correctly. Action Make sure the floor is level, strong, and stable. If the floor sags or slopes, contact a carpenter. Check and level the range. (See the Installation Instructions.) Ensure that cabinets are square and provide sufficient room for installation. Replace fuse or reset circuit breaker. See page 22. See page 24. See page 16. See page 32. Remove foil. See page 15. Troubleshooting NX5000M_NX58M6650WS_AA_DG68-00993A-04_EN+MES+CFR.indb 46 2018-12-18 6:57:28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
46 English
Troubleshooting
Troubleshooting
Others
Problem
Possible cause
Action
The product is not
level.
The appliance has been
installed improperly.
The leveling leg(s) is (are)
damaged or uneven.
Make sure the floor is level, strong,
and stable. If the floor sags or slopes,
contact a carpenter.
Check and level the range. (See the
Installation Instructions.)
The kitchen cabinets are
not properly aligned and
make the range appear to
be not level.
Ensure that cabinets are square
and provide sufficient room for
installation.
The display goes
blank.
The electrical outlet Ground
Fault Interrupter (GFI or
GFCI) has been tripped and
needs to be reset.
Your digital control has
been damaged.
Replace fuse or reset circuit breaker.
Food does not
bake or roast
properly in the
oven.
The wrong cooking mode is
selected.
See page
22
.
The oven racks have not
been positioned properly
for the foods being cooked.
See page
24
.
Incorrect cookware or
cookware of improper size
is being used.
See page
16
.
The oven thermostat needs
adjustment.
See page
32
.
There is aluminum foil
on the racks and/or oven
bottom.
Remove foil.
The clock or timers are not
set correctly.
See page
15
.
Problem
Possible cause
Action
Steam or smoke
coming from
under the
control panel.
This is normal.
The oven vent is located there.
More steam is visible when you
use the convection functions or
when baking or roasting multiple
items at the same time.
A burning
or oily odor
coming from
the vent.
This is normal for a new
oven and will disappear
within 1/2 hour of the
first bake cycle.
To speed the process, set a self-
cleaning cycle for a minimum of
3 hours. (See page
39
and
40
.)
A strong odor.
This is temporary.
The insulation around the inside
of the oven emits an odor the first
few times the oven is used.
Oven racks are
difficult to slide.
This is normal.
Apply a small amount of vegetable
oil to a paper towel and wipe the
edges of the oven racks with the
paper towel. Racks become dull
and hard to slide if they are left in
the oven during a self-clean cycle.
Fan noise.
This is normal.
The convection fan runs until the
function is over or the door is
opened.
The convection
fan is not
working.
This is normal.
The fan starts automatically when
the oven reaches the preheat
temperature.
NX5000M_NX58M6650WS_AA_DG68-00993A-04_EN+MES+CFR.indb
46
2018-12-18
°° 6:57:28