Samsung RB215BSSB Service Manual - Page 58
F-Room Temp Sensor trouble, F-Room Defrost Sensor trouble
![]() |
View all Samsung RB215BSSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Diagnostics 4) F-Room Temp Sensor trouble Start Is F-Room Temp Sensor normal? YES Is the insertion of MAIN PCB connector(CN80) normal? YES Is both trminal voltago of MAIN PCB �~� (Yellow-BROWN) normal? Refer to Temp detection circuit YES sensor of the circuit explanation. Is MICOM Pin#51 input voltage normal? Identical Voltage �~� of CN30) YES Change MAIN PCB 5) F-Room Defrost Sensor trouble Start Is F-Room Defrost Sensor normal? YES Is MAIN PCB (CN30) insertion normal? YES Is both trminal Voltage of MAIN PCB �~� (ORANGE-BROWN) normal? Refer to Temp detection circuit YES sensor of the circuit explanation. Is MICOM Pin#52 input voltage normal?(Identical Voltage �~� of CN30) YES Change MAIN PCB 58 ERROR INDICATION NO Change Temp Sensor NO Connector contact trouble /re-insertion NO (0.5V>Measured value) Reconfirm electric wire connect section NO Check soldering fault,short, Lead Touch ERROR INDICATION NO Change Defrost Sensor NO Connector contact trouble /re-insertion NO (0.5V>Measured value) Reconfirm electric wire connect section NO Check soldering fault,short, Lead Touch
![](/manual_guide/products/samsung-rb215bssb-service-manual-a8aeb6e/58.png)