Samsung RF4289HARS Quick Guide (easy Manual) (ver.1.0) (English) - Page 6

Setting up your French Door Refrigerator Getting ready to install the refrigerator Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art features and efficiencies that this new appliance offers. Selecting the best location for the refrigerator • A location with easy access to the water supply. • A location without direct exposure to sunlight. • A location with a leveled floor. • A location with enough space for the refrigerator doors to open easily. • Allow sufficient space to the right, left, back and top for air circulation. • Plaease ensure that appliance can be moved freely in the event of maintenance & service. • Allow clearance to the B right, left, back and top A when installing. This will help reduce power C E D consumption and keep your energy bills lower. • Do not install the refrigerator where the temperature will go below 50ºF (10ºC). • Do not locate the refrigerator where it may become wet. When moving your refrigerator To prevent floor damage, be sure the front caution adjusting legs are in the up position (above the floor). Refer to 'Adjusting the doors' in the manual (on page 9). 2 inches 2 inches 33/4 inches Flat-blade screw driver(-) Control Lever If the refrigerator does not have enough space, the internal cooling system may not work properly. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When you install the refrigerator next to a fixed wall, you need a minimum clearance of 3 ¾" (95mm) between the refrigerator and wall to allow the door to swing open. First thing! Make sure that you can easily move your refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc. The following chart details the exact height and depth of this Samsung French Door Refrigerator. FLOORING For proper installation, this refrigerator must be placed on a leveled surface of hard material that is the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 359lbs (165kg). To protect the finish of the flooring, cut a large section of the cardboard carton and place it under the refrigerator where you are working. When moving a refrigerator, you need to pull and push it straight forwards or back. Do not wiggle it from side to side. Model Depth "A" Width "B" Height "C" Overall Height "D" Depth "E" RF4289HA 29½" (749 mm) 35⅞" (912 mm) 68⅝" (1742 mm) 69⅝" 36¼" (1768 mm) (922 mm) 06_ setting up