Samsung RFG298AAPN User Manual (user Manual) (ver.0.5) (English) - Page 13

coupler, clip on the coupler with pulling tube.

Get Samsung RFG298AAPN PDF manuals and user guides View all Samsung RFG298AAPN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

01 SETTING UP REAttACHinG tHE REFRiGERAtoR DooRs 4. Connect the dispenser door tube ( 5 ) and then insert a clip on the coupler with pulling tube. C onnect the connector ( 4 ) on the left side door and two connectors ( 3 ) at each side of the top cap. 3 4 The clip is enveloped inside of the top cap. 3 5 dispenser door tube The dispenser door tube ( 5 ) must be fully inserted to the marked line to CAUTION prevent water leakage from the dispenser. coupler 5. Position the top table ( 2 ) in place. Insert and tighten the 3 screws into the top table with a philips screw driver(+). After door opened, reinsert the cap top table ( 1 ) and close the doors. 2 When reattaching the top table, make sure that the wires are not pressed or damaged by the hinge cover. 1 After assembling, close the door and check to see whether the door has gaps between gaskets or is tilted. If you see one of them, please refer to "Adjusting the doors" on page 15. Setting Up _13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
Setting Up
_13
01 SETTING UP
5.
Position the top table (
2
) in place. Insert and tighten
the 3 screws into the top table with a philips screw
driver(+). After door opened, reinsert the cap top table
(
1
) and close the doors.
1
2
REATTACHING THE REFRIGERATOR DOORS
The dispenser door tube (
5
) must be fully inserted to the marked line to
prevent
water leakage from the dispenser.
CAUTION
3
3
4
5
4. Connect the dispenser door tube (
5
) and then insert a
clip on the coupler with pulling tube.
Connect the connector (
4
) on the left side door and
two connectors (
3
) at each side of the top cap.
The clip is enveloped inside of the top cap.
coupler
dispenser door tube
When reattaching the top table, make sure that the
wires are not pressed or damaged by the hinge cover.
After assembling, close the door and check to see
whether the door has gaps between gaskets or is tilted.
If you see one of them, please refer to “Adjusting the
doors” on page 15.