Samsung RFG298AAPN User Manual (user Manual) (ver.0.5) (English) - Page 19

01 SETTING UP INSTALLING THE WATER LINE Connecting the water supply line to the refrigerator. There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store. Use Copper Tubing • ¼" copper tubing • ¼" compression nut (2pc) • Ferrule (2pc) Use Plastic Tubing • ¼" plastic tubing → Molded end(Bulb) • ¼" compression nut (2pc) Plastic tubing (Supplied) Refrigerator Compression nut (1/4") (Supplied) Compression fitting (Supplied) Ferrule (Not supplied) Molded end(Bulb) Compression nut (1/4") (Not supplied) Copper tubing or Plastic tubing (Not supplied) (Not supplied) Household water supply line 1. Slip the compression nut through the supplied plastic tubing . 2. T ighten the compression nut onto the 1/4" compression fitting. - If you are using copper tubing, slip the compression nut (not supplied) and ferrule (not supplied) on copper tubing (not supplied) as shown. - If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing into the compression fitting. CAUTION Do not use without the molded end(Bulb) of the plastic tubing . 3. Tighten the compression nut onto the compression fitting. Do not over-tighten the compression nut . 4. Turn water on and check for any leakage. Only connect the water line to a drinkable water source. If you have to repair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure you get a snug, leak-free connection. Setting Up _19