Samsung RH22H9010SR User Manual Ver.02 (English, French, Spanish) - Page 19
Installing The Water, Dispenser Line - ice maker
View all Samsung RH22H9010SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
setting up INSTALLING THE WATER DISPENSER LINE A water dispenser is one of the helpful features on your new Samsung Refrigerator. To help promote better health, the Samsung water filter removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You may need to purchase a water purifying system to do that. The water line also connects to the ice maker. For the ice maker to operate properly, water pressure of 20 ~ 125 psi (138 ~ 862 kPa) is required. If the refrigerator is installed in an area with low water pressure (below 20 psi), you can install a booster pump to compensate for the low pressure. After you have connected the water line, make sure the water storage tank inside the refrigerator is properly filled. To do this, press the water dispenser lever until water runs from the water dispenser. Connecting to the water supply line 1. First, shut off the main water supply line and turn the ice-maker off. The refrigerator should NOT be plugged in at this point. 2. Locate the nearest cold water drinking water line. 3. Install the pipe clamp and shut off valve. 4. Connect the water line installation kit to the shut off valve. Cold water line Pipe clamp Shut off valve Water line installation kit Water line installation kits are available at extra cost from your dealer. We recommend using a water supply kit that contains copper tubing. The Samsung refrigerator warranty does not cover water line installation. We strongly recommend you have a plumber or authorized installer install the water line. DA68-02976A-02.indb 19 English - 19 14. 4. 23. �� 8:53