Samsung SCC-931T User Guide - Page 11
DOME COVER assembly.
UPC - 836164368379
View all Samsung SCC-931T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 20 Installing SCC-931T(P) 7) Route the cables through the PIPE assembly hole on the side of the PIPE, align the INDEX KEY arrow mark ( ) of the CAMERA body to the groove on the CAMERA, mount the CAMERA body and turn it clockwise all the way tight, and then fasten the two SCREWS. 8) Use a "minus" screwdriver or a coin to turn the CAP BOLT clockwise to fasten it to the PIPE assembly hole at the bottom of the CASE. (Make sure that an O RING (P22 T2.4) is inserted into the CAP-BOLT. If the O RING is not inserted, it will not be waterproof and cause damage to the product.) 20 9) After arranging the connected power cable and video cable inside the PIPE and then pulling them out, put together the CAMERA's PIPE assembly screw (3/4" Threaded) and the PIPE's screw (3/4" Threaded) to fasten the SET. (*Wrap a TEFLON TAPE around the threaded area of the PIPE to make the connection watertight, and make sure that the cables are not caught by the fastening area.) 10) Adjust the LENS direction and assemble the DOME COVER. (Refer the steps 6 to 8 of the ceiling installation for LENS adjustment and DOME COVER assembly.) 21